European Technical Approvals (ETA)
Areas of approvals
- 01.02/12 Wire rope panels
- 01.02/13 Wire ring mesh panels
- 01.02/03 Kit for soil nails
- 01.02/04 Kit for Rock and Soil Anchors
- 01.02/05 Welded Gabion Products
- 01.02/07 Welded Gabion Products
- 01.02/08 Plantable Coverings Made of Welded Steel Grids for Slope Stabilisation Systems
- 01.02/09 Kit for friction pipe anchors
- 01.02/10 Non-reinforcing hexagonal geogrid for the stabilization of unbound granular layers by way of interlock with the aggregate
- 01.02/11 Steel mesh systems for reinforced fill
- 01.03/02 Permanent insulating shuttering kit for whole building
- 01.03/04 Vibration isolation of buildings with elastomeric bearings
- 01.03/12 Sliding bearing
- 01.03/14 Piles made of ductile iron
- 01.03/18 Eccentric anchored sheet piles
- 01.03/19 Structural steel piles with hollow sections and rigid splices
- 01.03/09 Pile Joint for Concrete Piles
- 01.03/10 Kit for micropiles
- 01.05/10 Steel markings for blind pedestrians - bumps and boards
- 01.05/01 Road pavement products - Ultra thin layer asphalt concrete.
- 01.05/06 Level-crossing-systems (Type A1, A2 and B)
- 01.05/07 Semi-flexible Pavement/Floor Topping
- 01.05/08 Surface Treatment Product for Highways
- 01.05/09 Permanent Road Surface Repair System
- 01.06 Motorway and road equipment
- 01.06/02 Falling rock protection kits
- 01.06/13 Steel mesh for retaining of unstable slopes
- 01.06/01 Kit for traffic noise reducing devices
- 01.06/04 Microprismatic retro-reflective sheetings
- 01.06/07 Wood and metal composite lighting columns
- 01.06/08 Road marking products
- 01.06/09 Road Marking Materials: Drop on Materials - High Refractive Index Retro-reflective Elements
- 01.06/11 Steel Mesh for Retaining of Unstable Slopes by Controlling and Preventing Rockfalls and Loose Debris Flow Along Highways, Roads, and Railways
- 01.06/12 Steel lighting columns
- 01.07/03 Solid wood slab element to be used as a structural element in bridges
- 01.07/01 Liquid Applied Bridge Deck Waterproofing Kits
- 01.07/02 Expansion Joints for Road Bridges
- 01.07/05 Polymer Modified Bitumen Liquid Applied Bridge Deck Waterproofing Kit
- 01.07/06 Flexible plug expansion joints for road bridges with flexible filling based on advanced polyurethane
- 01.07/07 Flexible plug expansion joints for railway bridges with flexible filling based on advanced polyurethane
- 01.08/02 Welded Soil Boxes
- 01.09/05 Double-walled cylindrical flat-bottom tank made of GRP
- 01.09/06 Spherical, double-walled tank of polymer concrete faced with GRP
- 01.09/07 Single-walled cylindrical flat-bottom tank made of GRP
- 01.09/12 Double wall static tanks made from rotating moulded polyethylene for above ground storage of domestic heating oils and Diesel fuels
- 01.09/14 Sump Pallets Made of Steel
- 01.11 Sea wall protection
- 01.11/02 Prefabricated concrete columns slope for revetments with a high stability
- 01.11/01 Prefabricated elements for sea wall protection
- 02 PREFABRICATED BUILDINGS AND BUILDING SYSTEMS
- 02.02 Prefabricated industrial and commercial buildings (Portakabin)
- 02.02/02 Metal Frame Self-storage System
- 02.02/01 Prefabricated Building Units
- 02.03 Building systems, total
- 02.03/05 Steel Framed Membrane Building Kit
- 02.03/01 Timber frame building kits
- 02.03/02 Log building kits
- 02.03/07 Glued massive timber building kit
- 02.04 Building systems, partial
- 02.04/04 Panels of steel wires with incorporated thermal insulation for whole structure
- 02.04/01 Concrete Frame Building Kits + Metal Frame Building Kits
- 02.04/10 Light Gauge Secondary Structures
- 02.04/13 Metal frame kits for buildings or parts of buildings
- 02.04/06 Timber frame kit
- 02.04/07 Prefabricated Timber Framed Load-bearing Wall Elements
- 02.04/11 Modular Construction System
- 02.05 Prefabricated refrigerated buildings
- 02.05/01 Kits for prefabricated cold storage rooms
- 02.05/02 Kits for prefabricated cold storage buildings including those designed for particular aggressive (physical and chemical) environments
- 03 LOAD BEARING COMPONENTS
- 03.01/02 Couplings for standardized reinforcing bars and sleeves including reinforcing bars of approved steel with threated ribs.
- 03.01/05 Double headed studs for the increase of punching resistance in flat slabs on column
- 03.01/14 Post-tensioning kits for prestressing of structures.
- 03.01/23 Punching preventer for concrete slabs.
- 03.01/38 Precast concrete products - Beams made of prestressed steel fibre concrete
- 03.01/39 T-headed Reinforcement Steel Bars
- 03.01/43 Mechanical Anchorages for Reinforcing Bars
- 03.01/45 Kit for Reinforced Concrete Members Subject to Compressive Load
- 03.01/46 Connections between precast concrete beams and columns
- 03.01/49 Precast Concrete Products - Wall Elements of Steel Fibre Cement
- 03.01/50 Kit for Prestressed Flat Slabs with Steel Fibre Reinforced Concrete
- 03.01/55 Corrugated Plastic Ducts
- 03.01/56 Sulphur Concrete Elements
- 03.01/59 Load Bearing Thermal Insulation Elements which Form a Thermal Break Between Balconies and Internal Floors
- 03.01/60 Kit of Concrete Columns and Prefabricated Bracing Light-weight Concrete Infill
- 03.01/69 Glass-fibre reinforced plastic bar used as reinforcing bar of concrete
- 03.01/70 Spun columns with reinforcement areas of longitudinal reinforcement higher than 8% up to 16% of the area of the concrete section
- 03.01/71 Mechanical splice for reinforcing steel bars
- 03.01/73 Stay cable system
- 03.01/75 Reinforced concrete sandwich element with embedded cylinders in thermoplastic polymer for translucent wall elements
- 03.01/84 With lamella insulation insulated fiber concrete façade element
- 03.01/86 Prefabricated reinforced concrete connection-element for joining the steel- and concrete-part of hybrid-towers by use of prestressing without bond
- 03.01/87 Prefabricated reinforced concrete annular elements for masts with special properties for highly stressed compression joints
- 03.01/35 Spherical and cylindrical bearing with special sliding material
- 03.01/72 Lift control pot bearing
- 03.01/77 Spherical or cylindrical bearing with special friction material
- 03.01/78 Alga Sferon hotslide spherical bearings
- 03.01/81 Pot bearing with special sealing
- 03.01/82 Pot bearing with special sliding material
- 03.01/83 Guide bearing with special sliding material
- 03.01/85 Friction pendulum bearings
- 03.01/26 Rapid setting cement A, B & C
- 03.01/27 Rapid setting Cement
- 03.01/30 Hydraulic binder (slag and additives)
- 03.01/32 Natural calcined pozzolana as type II addition
- 03.01/34 Fly ash for concrete
- 03.01/40 Special cement CEM III/A with high sulphate resistance
- 03.01/41 Calcium Carbonate Fines as Additions for Concrete with Binding Properties Similar to Additions Type II
- 03.01/42 Composite cement (clinker, blast furnace slag, natural pozzolana) class 32.5 N-LH with high sulphate resistace
- 03.01/47 Reinforcing Kit with Carbon Fibre Laminates for the Strengthening of Beams and Plates of Reinforced and Prestressed Concrete
- 03.01/48 Polymeric Concrete Addition
- 03.01/51 Ash from the Incineration of Virgin and Untreated Wood as a Type I Addition for Concrete
- 03.01/52 Ash from the Incineration of Virgin and Untreated Wood as a Type II Addition for Concrete
- 03.01/54 Modified Fly Ash for Concrete
- 03.01/57 Calcined Layer Silicate Based Type II Addition
- 03.01/58 Mortars Based on Sulphur
- 03.01/61 Sedimentation Reducing Concrete Admixture
- 03.01/62 Hydraulic Filling Material for Large Underground Volumes
- 03.01/63 Processed Blend of Main Constituents According to EN 197-1, Without Clinker, as a Type II Addition for Concrete
- 03.01/64 Rapid Hardening Calcium Sulphoaluminate Based Cement
- 03.01/65 Low Shrinkage Calcium Sulphoaluminate Cement
- 03.01/66 Reaction Resin Mortar for Joints Between Concrete Elements
- 03.01/68 Alkali resistant glass fibres containing zirconium dioxide for the use in concrete
- 03.01/74 Premix for ultra high performance fibre-reinforced concrete mortar
- 03.01/79 Portland-pozzolanic cement for use in tropical conditions
- 03.01/80 Elastic micro hollow spheres as concrete admixture
- 03.01/88 Special ground granulated blast furnace slag based type II Addition
- 03.01/89 Refractory cement for use in refractory mortars and concrete
- 03.01/76 Concrete element kit for building services
- 03.02/07 Steel truss for roofs
- 03.02/08 Steel beams with special joining technology
- 03.02/09 Thermo-mechanically Rolled Long Steel Products Made of Weldable Fine Grain Structural Steel of Special Steel Grades
- 03.02/10 Hot Rolled Products of Structural Steels
- 03.02/11 Light Weight Floor System
- 03.02/12 Box Beam with Perforated, Inclined Webs
- 03.02/14 Cable net systems
- 03.02/16 Roof and Wall Systems with Hidden Fastenings
- 03.02/17 Powder-coating System for Structural Steel Components without Previously Galvanizing
- 03.02/18 Thin walled steel flat products predominantly for roofing and cladding with organic coil-coating system
- 03.02/19 Flat Aluminium Products Made of Aluminium Alloy EN-AW-5059
- 03.02/20 Load bearing external wall kit
- 03.02/21 Hot rolled products and structural components made of steel grades Q235B, Q235D, Q345B and Q345D
- 03.02/22 Hot finished structural hollow sections of non-alloy and fine grain steels with enhanced fire resistance performance
- 03.02/24 Corrosion protection system for load bearing cables
- 03.02/25 Hot rolled and hot-dip coated steel flat products made of steel grade S390GD
- 03.02/15 Fibres for Concrete: Metallic Amorphous Fibres
- 03.03/08 Permanent shuttering for floors and roofs
- 03.03/02 Profiled Steel Sheeting for Floor Systems in Combination with a Ribbed Reinforced Concrete Slab
- 03.03/10 Shaft for platform lift
- 03.03/07 Carbon fiber reinforced polymer composite laminate for the strengthening of structures
- 03.03/01 Modular preformed building panels
- 03.03/04 Wood-concrete Composite Slab
- 03.03/06 A non load bearing cast or spray applied hemp/lime system for internal and external wall construction
- 03.04/03 Prefabricated wood based load bearing stressed skin panels.
- 03.04/05 Light composite wood based beams
- 03.04/06 Solid wood slab element to be used as a structural element in buildings
- 03.04/07 Timber units for walls and roofs
- 03.04/09 Metal-Web beams and columns
- 03.04/10 Specalised glued laminated wood beam
- 03.04/12 Light Composite Wood-based Beam and Column with Isocyanate Adhesive
- 03.04/13 Structural Composite Lumber Products: Laminated Strand Lumber (LSL) and Parallel Strand Lumber (PSL)
- 03.04/14 Glued Laminated Timber Beam with 2 or More Waney Lamellas
- 03.04/15 EPI Adhesives
- 03.04/16 Solid Wood Slab - Element of Dowel Jointed Timber Boards to be Used as a Structural Element in Buildings
- 03.04/17 Prefabricated Wood Slab Element Made of Mechanically Jointed Square-sawn Timber Members to be Used as a Structural Element in Buildings
- 03.04/18 Load Bearing Timber Framed Wall Panels
- 03.04/19 Finger Jointing of Green Wood for Structural Application
- 03.04/20 Strength graded finger jointed structural timber - solid, tension proof loaded, structural timber beams and, used as laminations, flatwise laminated beams with up to 4 laminations
- 03.04/21 Glued laminated timber with high-strength lamellas and special longitudinal joints
- 03.04/22 Strength graded structural timber - square edged logs with wane
- 03.04/23 Monolithic or laminated beam and wall logs made of timber
- 03.04/24 Columns of glued laminated timber with 2 to 4 lamellas for timber frames for buildings
- 03.04/25 Multi-material composite slab to be used in building kits
- 03.04/26 Timber Structures - Glued-in rods for timber connexions
- 03.04/27 Walls, roofs and ceilings made of OSB–panels which are glued together on their surfaces
- 03.04/28 Green-glued laminated timber
- 03.04/29 Glued laminated timber made of hardwood
- 03.05/05 Systems of shuttering hollow blocks or plates made of insulating material and, sometimes, concrete.
- 03.05/06 Masonry Spacer Mat
- 03.05/07 Prefabricated Wall Elements of Bonded Clay Masonry Units
- 03.05/09 Factory Made Masonry Units of Cement Bonded Wood Chips
- 03.05/08 Kit for Bonding of Clay Masonry Units on Site
- 03.05/10 Kit for load bearing masonry subject to seismic actions - AAC masonry systems
- 03.05/11 Load bearing masonry of autoclaved aerated concrete masonry units with bonding by single-component polyurethane adhesive
- 04.01/12 Spacer kits for built-up metal roof and wall cladding
- 04.01/13 Snow stopper for roof
- 04.01/04 Self-supporting composite lightweight panels
- 04.01/09 Self-supporting translucent roof Kits
- 04.01/10 Roof Insulation Supporting Roofing Tiles
- 04.01/14 Sandwich panels made from a EPS core with magnesium oxide/magnesium chloride facings on both sides
- 04.01/02 Inverted Roof Insulation Kits
- 04.01/11 Kits for green roofs
- 04.02/02 Mechanically fastened flexible waterproofing membranes including the system of fastenings
- 04.02/30 Large Span Load-bearing Sandwich Panels for Roofing
- 04.02/26 Plastic-rubber Roofing Slates
- 04.02/29 Terrace Decking Kit
- 04.02/35 Kit for roofing systems made of polymer slates and ancillary products
- 04.02/37 PVC-UE and PVC-U profiled external roof cladding sheets
- 04.02/01 Liquid roof waterproofing systems
- 04.02/12 Bitumen shingles with cellulose reinforsement.
- 04.02/16 Composite roof waterproofing kit.
- 04.02/18 Roofing underlay
- 04.02/20 One Component Bitumen-polyurethane Resin for Flashing Application Applied Directly to Bitumen Waterproofing Membrane Used in the Horizontal Part of the Roof
- 04.02/21 Low Bitumen Mass Shingles with Mineral or Synthetic Reinforcement
- 04.02/22 Laminated Low Bitumen Mass Shingles with Mineral or Synthetic Reinforcement
- 04.02/27 Corrugated Bitumen Tiles
- 04.02/33 Liquid applied roof waterproofing kit based on a rubber solution
- 04.02/36 One-component MS polymer based liquid applied roof waterproofing product
- 04.02/38 Systems of mechanically fastened flexible roof waterproofing membranes with an adhesiv bonding
- 04.02/17 Insulation system for warm Roofs
- 04.02/19 Kit of a thermal insulation board, facing and adhesive to be used for accessible flat roofs for pedestrian traffic
- 04.02/28 Thermal insulation roof kit for metal of flexible roof coverings
- 04.02/31 Roof Covering Kit Using In-situ Sprayed Polyurethane Foam
- 04.03 Building components in contact with ground
- 04.03/03 Substructure kit for heated buildings
- 04.03/02 Remedial Damp-proof Course
- 04.04/13 Structural Sealant Glazing Systems
- 04.04/23 Balcony (and terrace) glazing system without vertical frames
- 04.04/25 Single-Point supported vertical glazing
- 04.04/32 Acrylic foam tape for structural glazing or cladding applications
- 04.04/36 Glazing Guardrail Kit
- 04.04/43 Parapet Made of Glass with Failure Protection
- 04.04/45 Regrouped with 04.04/46
- 04.04/46 Insulated Glass Unit with Structural Sealant Punctually Anchored
- 04.04/50 Structural glazing system mechanically supported with fix points
- 04.04/51 Structural glazing system mechanically supported with holders
- 04.04/56 Cantilevered Structural Glass Railing/Balustrade
- 04.04/57 Curve toughened glass
- 04.04/58 Glass fiber resin profiles for application in structural sealant glazing kit
- 04.04/30 Translucent external wall insulation made of prefabricated facade panels
- 04.04/44 Kit for Non-loadbearing Internal and External Walls Made of Glass Blocks
- 04.04/60 Wall element made of EPS-core autoclaved aerated concrete masonry for non-loadbearing internal and external walls for acoustic and thermal insulation purposes
- 04.04/02 Veture Kits - Prefabricated Units for External Wall Insulation
- 04.04/08 Kits for External Wall Claddings
- 04.04/11 External Thermal Insulation Composite Systems with Rendering
- 04.04/12 Prefabricated Compressed Mineral Wool Boards with Organic or Inorganic Finish and with Specified Fastening System.
- 04.04/22 Lightweight framing elements for non-ventilated sheet metal facades
- 04.04/26 ETICS for use in timber frame building
- 04.04/33 With Brick Tiles Coated External Insulation System (vorher: 12.01/20)
- 04.04/35 Kit composed of subframe and fixings for fastening cladding elements and also external wall elements
- 04.04/37 Integrated Facade Kits with Active and/or Passive Solar Elements (IFK-SRE)
- 04.04/40 External Thermal Insulation Composite System Faced with Clinker Brick
- 04.04/41 Ventilated Facade System with Self-supporting Composite Panels
- 04.04/52 Kits for non load-bearing mineral board external wall systems
- 04.04/53 Kits for external wall cladding systems with exterior continuous finishes applied in situ for ventilated and non-ventilated façades
- 04.04/55 Glass fibre mesh for reinforcement of cement based rendering
- 04.04/59 External thermal insulation composite system (ETICS) with rendering on polystyrene cement insulation
- 04.04/61 Facade elements made from EPS
- 04.04/47 PET Based Foils with Coating in Order to Enhance Energy Economy and Heat Retention
- 04.04/48 Insulating Glass Units Production with Heat Mirror Film
- 04.04/54 Self supporting light weight insulation panels
- 04.05/14 Door threshold with build-in draining system off of water
- 04.05/17 Roof , Floor, Wall and Ceiling Hatches providing access or for use as an emergency door / with or without fire resistance
- 04.05/18 LAMI Glass Fibre Reinforced Polyester Doors (LAMI GRP Doors)
- 04.05/12 Invisible concealed hinges
- 04.05/13 Emergency escape bolts
- 04.05/16 Powered Pedestrian Door Drives and Systems
- 05 SUPPLEMENTARY INTERNAL BUILDING COMPONENTS
- 05.01/07 Suspended Ceiling Kits for Use in Exterior Applications
- 05.01/05 Sound absorbing elements for internal use
- 05.01/08 Mineral Pre-coated Ceiling Panels
- 05.02/10 Permanent Shuttering for Floors
- 05.02/13 Non loadbearing permanent shuttering system for floor construction based on cement-bonded wood chip elements
- 05.02/02 Composite Structural Floor Systems
- 05.02/03 Insulating floor finishing systems with flooring elements
- 05.02/04 Polyurethane-bound mats made of mineral material to be used for impact sound insulation
- 05.02/07 Agglomerated cork with polyurethane binder
- 05.02/08 Light Weight Cementitious Screed
- 05.02/11 Rubber Fibre Mat to be Used for Impact Sound Insulation
- 05.02/12 Composite Boards Made of Agglomerated Cork and Grain Recycled Rubber for Acoustic and Thermal Insulation
- 05.03 Floor covering systems
- 05.03/02 Watertight Covering Kits for Wet Room Floors and/or Walls
- 05.03/06 Floor covering on the basis of polyurethane
- 05.03/10 Self-adhesive anti-slip covering for floorings
- 05.03/11 Internal wall- and floor-covering made of coconut shells
- 05.03/12 Composite floor coverings
- 05.03/03 Vibration isolation of floors with elastomeric bearings
- 05.03/04 Bitumen - coated polystyrene granules as a dry-mix for impact sound insulation
- 05.03/08 Mortar with Insulating Components for Floor-decks
- 05.03/09 Modular Tiles of Natural Stone Including Snap-on Connection and Polyurethane Layer
- 05.04 Wall covering systems
- 05.04/07 Cement-bonded board
- 05.04/04 Large-sized fibregypsum panels used for walls of prefabricated houses
- 05.04/05 Homogenous building board for internal lining
- 05.04/12 Reinforced Tape for Assembled Gypsum Plasterboards
- 05.04/13 Pre-formed drywall lining accessories
- 05.04/15 Hard gypsum plasterboards for load bearing applications
- 05.04/16 Gypsum plasterboards, gypsum fiberboards and fiber cement boards used as fire protection of wall and floor assemblies
- 05.04/14 Reconstituted stones for wall cladding
- 05.05/01 Internal partitions Kits
- 05.05/05 Self-adhesive Glass Mesh Tape
- 05.05/06 Special Drawn Sheet Glass
- 05.05/08 Non load-bearing partition kit
- 05.05/07 Board made of change phase material
- 05.06/03 Prefabricated stair kits
- 05.06/04 Plastic steps for underground man entry chambers
- 06.01/24 A factory-made structural anchor for attachi
- 06.01/18 Dowels for Structural Joints
- 06.01/25 Connections for precast concrete staircases
- 06.01/01 Anchor channels
- 06.01/03 Metal anchors for use in concrete
- 06.01/08 Metal anchors for use in concrete for fixing lightweight systems
- 06.01/11 Chemical anchoring kit
- 06.01/12 Special Anchors for the fastening of external weather resistant skins
- 06.01/13 Rubber based expansion anchor
- 06.01/14 Cast-in anchor bolt of ribbed reinforcing steel
- 06.01/15 Steel plate with cast-in anchors
- 06.01/16 Fastener of external wall claddings
- 06.01/19 Anchor for External Thermal Insulation Composite Systems (ETICS)
- 06.01/20 Concrete screw for anchorage in normal-weight concrete
- 06.01/21 Metal anchor for use in autoclaved aerated concrete
- 06.01/23 Cast-in anchor with Internal Threaded Socket
- 06.01/26 Wire rope loop system to connect precast concrete components
- 06.01/27 Plastic anchor for use in concrete
- 06.01/28 Power-actuated fastener for multiple use in concrete for non-structural applications
- 06.01/29 Fiber-reinforced composite connectors anchored in concrete
- 06.01/32 Anchors spiral ANKSYS for fixing of external thermal insulation composite systems with rendering
- 06.01/30 Anchor devices for protection against falls from a height
- 06.01/31 Personal fall protection anchor
- 06.01/09 Resilient sound insulation battens designed to optimize the sound insulation of walls
- 06.01/10 Vibration and noise isolation with elastically fixed ceilings
- 06.02/02 Tensile Rod System
- 06.02/03 Point Fastener
- 06.02/05 Cartridge Fired Pin for Connections for Thin Gauge Steel Members and Sheeting
- 06.02/06 Steelwork Connector
- 06.02/07 Fastening screws for metal members and sheeting
- 06.02/08 Bolted glazing kit
- 06.02/09 Prefabricated Steel and Stainless Steel Wire Ropes with End Connector
- 06.02/11 Expanding Structural Bolting Assemblies for Blind Fastening of Steel Components
- 06.02/12 Fastening Screws for Sandwich Panels
- 06.02/13 Blind rivets for metal members and sheeting
- 06.02/15 Girder clamp
- 06.02/16 Special high-strength structural bolting assemblies for friction and torsion free preloading
- 06.02/17 High-strength stud and nut assemblies for preloading with calibrated preload
- 06.02/18 Special securing washer for high-strength structural bolting assemblies for preloading under dynamic loads or vibrations
- 06.02/19 Steel weld pins for fixing of thermal insulation products
- 06.03/01 Three-dimensional nailing plates with specified fasteners
- 06.03/05 Annular ringed shank nails and connector screws for use in nailing plates and three-dimensional nailing plates in wood structures
- 06.03/08 Self-tapping Screws for Use in Timber Constructions
- 06.03/10 Dowel-type fasteners with resin coating
- 06.03/12 Profiled aluminium nail for use in timber structures
- 06.03/11 Fasteners for mechanical fastening of waterproofing and/or insulation on to the old waterproofing/insulation in renovation
- 06.04/02 Plastic Anchors for Multiple Use in Concrete and Masonry for Non-structural Applications
- 06.04/03 Metal anchors for use in masonry
- 06.04/06 Powder actuated fastener for the fixing of insulation material
- 06.05/01 Sealing kits, profiles and strips usually made of foamed polyurethane, plastic impregnated bitumen or butyl.
Combined with 06.05/04.
- 06.05/21 Kit of waterproofing polymeric membrane and other components for creating a waterproofing system against action of water on walls and floors of buildings under indoor and outdoor conditions
- 06.05/22 Composite waterproofing kit of rubber for roofs and construction works
- 06.05/23 kit of liquid applied polymer modified mineral sealing mass and other components in contact with tile coverings for creating a waterproofing system against action of water on different parts of constructions under indoor and outdoor conditions
- 06.05/30 Liquid Applied Water Vapour Control Layers
- 06.05/33 Sealing device for waterproofing form tie holes, holes or cast-in pipes in concrete casting and masonry walls
- 06.05/35 Kits for bridging expansion joints with and without sealing function for trafficked and non-trafficked areas of buildings
- 06.05/29 In Situ Sprayed Polyurethane Foam for Sealing Joints, Filling Cavities and for Fixing Construction Elements
- 06.05/11 Joint sealing compounds for the sealing of construction works for the contain-ment, handling and filling of water-endangering substances
(substances hazardous to water)
- 06.05/12 Joint profiles for the sealing of construction works for the containment, handling and filling of water-endangering substances
(substances hazardous to water)
- 06.05/13 Coating system eliminating electrostatic charges for facilities used for the storage, filling and handling of water endangering liquids
- 06.05/14 Coating system to be used for facilities for the storage, filling and handling of water endangering liquids
- 06.05/15 Plastics Sheets for the Lining of Collecting Basins and Collecting Rooms for the Storage of Liquids Hazardous to Water
- 06.05/16 Pre-fabricated Elements Made of Concrete and Reinforced Concrete Used in Facilities to Deal with Liquid Chemicals (Substances Hazardous to Water)
- 06.05/17 Sealing system made of asphalt to seal areas, suitable as installation for discharging water-contaminating liquids over sloping to use in construction works to deal with water-contaminating substances
- 06.05/19 Joint sealing system glued on concrete
- 06.05/26 Concrete Protection Linings of Collecting Basins/ Rooms for Liquids Hazardous to Water
- 06.05/34 Plastic sheets made of polyethylene for the lining of collecting basins and collecting rooms for the storage of liquids hazardous to water
- 07 WATER SUPPLY AND SEWAGE
- 07.01 Water supply systems
- 07.01/02 Buried glass reinforced filament wound (GRE) piping systems for the transport under pressure of water intended for human consumption.
- 07.01/03 Buried glass reinforced filament wound (GRE) piping systems for the transport under pressure of water intended for human consumption polluted soils
- 07.01/04 Plastics piping kits for the transport system of hot and cold water, made of PE-RT Type II
- 07.01/05 Plastics Piping Kits for the Transport System of Hot and Cold Water, Intended for Human Consumption, Made of Glass Reinforced Polypropylene
- 07.01/07 Plastics piping kits as a transport system of hot and cold water, made from cross linked medium density polyethylene (PE-MDX)
- 07.01/08 Plastics piping kits as a transport system of hot and cold water consisting of pipes made from PB-H Type II and mechanical and/or welded fittings
- 07.04 Drainage / sewerage components
- 07.04/18 Prefabricated Small Wastewater Treatment Plants
- 07.04/20 After treatment system for the effluent of small wastewater treatment systems - disinfection
- 07.04/23 Prefabricated wastewater treatment plants for up to 500 PT
- 07.04/04 Kit consisting of a trap with partially mechanical closure, mounted in a non-trapped gully.
- 07.04/07 Plastics Piping Kits for the Underground Transport under Pressure of Water not Inrtended for Human Consumption, Made of Glass Reinforced Filament Wound Epoxy (GRE)
- 07.04/08 Buried glass reinforced filament wound (GRE) piping systems for drainage and sewerage with or without pressure.
- 07.04/09 Pipe liner for renovation of underground non-pressure sewerage networks with nominal pipe diameters from 100 mm to 1200 mm to be incorporated with a special procedure
- 07.04/10 Flexible couplings for gravity and pressure sewerage and drainage pipe
- 07.04/13 Unplasticized polyvinylchloride (PVC-U) piping system for domestic waste water discharge inside the building to a maximum discharge temperature of 75 °
- 07.04/14 A packaged small domestic waste water treatment plant (Inclusive Capping Structure) for up to 50 PT, made of rotationally moulded PE for use underground and subjected to traffic loads
- 07.04/15 Fabricated Fittings Manufactured by Heat Moulding from an Extruded Unplastiziced Poly (PVC-U) Pipe with an Intermediate Layer of PVC-U Foam, to be Used with PVC-U Pipes for Non-pressure Drainage and Sewerage Buried in the Ground
- 07.04/16 Swivel Joints Manufactured by Heat Moulding from an Extruded Unplastiziced Poly (PVC-U) Pipe, with a Free Angle of Deflection to a Maximum of 30° to Increase the Flexibility of Fittings, such as Brands, Couplers and Saddles
- 07.04/19 Waster water pipe renovation with inner coating of glass-fibre reinforced polyester compound, for use inside and outside buildings
- 07.04/22 Sewage separator inside building
- 07.04/24 Preassembled linear unit for non-pressure underground drainage or infiltration, formed by a plastic perforated pipe, special EPS granulate, a geotextile and wrapped by a mesh
- 07.05 Sanitary applications
- 07.05/05 Prefabricated bathroom
- 08 HEATING AND VENTILATION
- 08.02 Components for heating systems including chimneys
- 08.02/17 Plastics Piping Kits for Heating Systems, Made of Glass-reinforced Polypropylene
- 08.02/13 Plastic piping kits for heating systems, made of PE-RT with an oxygen barrier layer
- 08.02/16 Copper PlumbingTube with Polyethylene Covering for Sanitary and Heating Applications
- 08.02/19 Chimney Kit with Clay Flue Liner
- 08.02/20 Plastics piping kits for heating systems made of cross-linked medium density polyethylene (PE-MDX)
- 08.02/21 Plastics piping kits for heating systems consisting of pipes made of PB-R and mechanical and/or welded fittings
- 08.02/22 Kit consisting of composite chimney flue liner and ancillaries
- 08.02/23 Plastics piping kits for heating systems consisting of pipes made of PB-H type II and mechanical and/or welded fittings
- 08.02/24 Kit for system stove-chimneys with clay/ceramic flue liner and integrated stove
- 08.02/25 Kit consisting of chimney flue liner, made of glass fibres, mineral and organic substances and ancillaries
- 08.03 Ventilation systems
- 08.03/01 Radon Detector Device
- 08.03/02 Kit for ventilation system with heat recovery
- 08.03/03 Plastic ventilation ducting system
- 08.04 Components for ventilation systems
- 08.04/02 Ventilation device with acoustic damping
- 08.04/03 Ventilation ducts made from insulation boards
- 08.05 Air-conditioning Systems
- 08.05/01 Piping made from thermoplastic materials, for the transport of chilled water
- 08.05/02 Kit for pre-insulated aluminium ducts
- 08.05/03 Modular element for building services
- 11.01/02 Computer designed and pre-fabricated steel beam with or without holes and fire protected with an intumescent coating
- 11.01/01 Fire Protective Products
- 11.01/03 With sprinkler kit fire protected steel structures
- 11.02 Fire resistant doors
- 11.02/01 Fire resistant doors
- 11.02/02 Fire doors
- 11.03/03 Early Suppression, Fast Response (ESFR) Automatic Fire Sprinkler
- 11.03/04 Extended Coverage Control Mode Automatic Sprinkler
- 11.03/05 Early suppression, fast response (ESFR), K240 to K360, upright and pendent automatic fire sprinklers
- 11.03/06 Fire-fighting robot kit to be used in tunnels, subsurface facilities and restricted spaces
- 11.03/02 Plastics Piping Kits to be Used in Fixed Fire Fighting Systems, Made of Glass-reinforced Polypropylene
- 11.04 Penetration sealing systems
- 11.04/01 Fire stopping and fire sealing products
- 11.04/05 Pipe penetration seal using an intumescent mat
- 11.04/11 Fire proof water trap
- 11.04/06 Flexible intumescent fire sealing strips, pre-shaped elements and coated fabrics
- 11.04/07 Fire seals, smoke and combined fire and smoke seals for fire resisting and/or smoke control door assemblies
- 11.05 Sealing of joints, penetrations, fire doors
- 11.05/01 Fire resistant paneling system for ceilings and vertical installations (including doors)
- 11.06 Fire protection products.
- 11.06/02 Fire resistant glazed elements
- 11.06/03 Fire retardant and anti-graffiti coating system. Available as two separate products
- 11.06/04 Fire protective boards and renderings for use as fire protective lining in tunnels
- 11.07 Fabric connecting joints
- 11.07/02 Kit for Closure System for Conveyors Systems
- 11.07/03 Fire resistant access panel for installation in walls or ceilings
- 12 VARIOUS BUILDING MATERIALS / COMPONENTS
- 12.01 Thermal insulation products
- 12.01/26 Floor Insulation Based on Polystyrene Light Weight Concrete
- 12.01/40 Thermal break made of cellular glass for structural and non structural masonry walls
- 12.01/01 Thermal insulation material and/or acoustic insulation material made of sheep's wool
- 12.01/02 Thermal insulation material and/or acoustic insulation material made of flax fibres
- 12.01/03 Rice husks in bulk used as thermal insulation
- 12.01/05 Thermal insulating board made of mineral material
- 12.01/06 Wood shavings in bulk to be used for thermal insulation
- 12.01/08 Factory made loose fill cellular glass
- 12.01/12 Products with Radiant Heat Reflective Component for Use in Thermal Insulation Systems of Building Envelopes (Wall, Ceiling, Floor and Roof)
- 12.01/13 Ceramic coating for thermal insulation
- 12.01/15 Mineral slag wool based in situ formed rendering material for thermal and/or acoustic insulation
- 12.01/16 Polyester Fibre Thermal Insulation
- 12.01/17 Boards Made of Natural Agglomerated Cork forTthermal and Acoustic Insulation
- 12.01/18 Insulation Material Made of Granulated Polystyrene and Compound
- 12.01/21 Soft foam insulation
- 12.01/22 Highly densified EPS as a load bearing and thermal insulating element
- 12.01/23 Insulation product made of expanded perlite (EPB)
- 12.01/24 Factory-made Boards and Products Formed by Moulding of a Silicate Polystyrene Composite for Thermal and/or Acoustical Insulation
- 12.01/29 Thermal Insulation Board Made of Expanded Polystyrene (EPS) and Cement
- 12.01/30 Factory Made Vacuum Insulation Panel (VIP)
- 12.01/31 Expanded Polystyrene (EPS) Insulating Blocks
- 12.01/32 Cement-bonding Insulating Board Made of Wood Chips
- 12.01/33 Granulated Polystyrene for Core Thermal Insulation of Cavity Walls (Two-leaf Masonry Walls)
- 12.01/34 Vacuum insulation panel (VIP) with factory applied protection layers
- 12.01/36 Fibre reinforced silica aerogel thermal insulation
- 12.01/37 Low lambda composite board for internal use
- 12.01/38 Load bearing thermal insulation base tub of expanded polystyrene (EPS)
- 12.01/39 Factory- made boards and products formed by moulding of an expanded polylactic acid (E-PLA) for thermal and/or acoustical insulation
- 12.01/41 Thermal vacuum insulation panel based on a microporous core encapsulated in a factory-applied multi-layer protective barrier film
- 12.01/42 Wall, roof and floor/basement floor panels made of waste ceramic in form of foams - fire and water resistant ceramic foam panels for thermal and acoustic insulatio
- 12.01/43 Factory-made products of extruded, foamed Polyethylene terephthalate (PET) for thermal and or acoustical insulation
- 12.02 Special covering products
- 12.02/04 Anti-corrosion paint for steel
- 12.02/05 Light-transmitting covering
