Semi-rigid sealing layers are used to create load-bearing surfaces in retaining systems, e.g. collecting rooms, collecting trays and surfaces, in storage, filling and handling facilities for substance

Joint sealing systems in SFH facilities Joint sealing systems, e.g. sealing strips, sealing sheets, compression profiles, extruded profiles, sealing tapes, coated sealing sheets and sealing compounds,

Steel and steel composite sealing systems serve to make retaining systems such as collecting rooms, collecting trays and surfaces in storage, filling and handling facilities for substances hazardous t

To create (load-bearing) surface seals for retaining systems, such as collecting trays, rooms or surfaces, in storage, filling and handling facilities for substances hazardous to water (SFH facilities

Balanced flue systems are room-sealed appliances, meaning that instead of using the air of the heating room as combustion air, outside air is supplied to the appliance. Balanced flue systems convey co

Chimneys for solid fuels serve to discharge flue gases from the combustion of solid fuels into the outside atmosphere via an outlet above roof level. They can also be used to discharge flue gases from

Cross-sectional reductions for existing chimneys are used for renovation and/or modernisation. The purpose may be to upgrade the chimney for operation under wet conditions or adapt the cross section o

Catalysts are used in firing systems to optimise the combustion processes and reduce the amount of harmful flue gas substances produced. Heating appliances, chimneys

For penetration-free fixing of photovoltaic systems or fall protection to the roof, the fixings can be bonded or welded to the roof waterproofing membrane. The roof waterproofing thus takes on a struc

Walk-on glazing is designed for foot traffic. A vertical imposed load of maximum 5 kN/m 2 is assumed under normal use conditions. Glazing accessible for maintenance and glazing with fall-through prote

Barrier glazing is glazing designed to prevent people from falling to a lower level. In the event of impact on the glazing, the risk of injury is supposed to be low. Furthermore, the lower-lying traff

Overhead glazing (also known as 'horizontal glazing') is understood to be glazing with an angle of inclination of more than 10° with respect to the vertical plane. With overhead glazing, it is assumed

With point supported glazing, the glass pane is mechanically fixed to the substructure either via point fasteners installed in drilled holes or via clamps (edge clamps). Point supported glazing is use

Amalgam separators serve to treat wastewater containing amalgam residues from treatment units in dental practices. Separator systems

Leakage detection systems are used for detecting leaks in storage and filling facilities for manure, slurry and silage effluent (MSS) and biogas storage and filling facilities (biogas SF facilities),

Sealing and monitoring systems (with plastic membranes) for use in storage, filling and handling facilities for substances hazardous to water (SFH facilities) usually consist of a multi-layer sealing

Translucent roof or wall systems are composed of single- or multi-layer flat or curved plastic sheets generally supported by aluminium support profiles and their fasteners. They are used both for roof

Adhesives are used in timber construction for the manufacture of glued elements and for the bonding of elements, including glued-in threaded rods or sheets, or for screw-press bonding. This page addre

Stand-alone safety devices for monitoring the opening state of a window ensure that ventilation systems and non-room-sealed heating appliances can be operated safely in combined operation mode. If the

Stand-alone safety devices with differential pressure monitoring serve to ensure that ventilation systems and non-room-sealed heating appliances can be operated safely in combined operation mode. For

Falsework beam clamps are connectors in falsework in accordance with EN 12812 with a mechanical fit based on contact pressure and friction. The contact pressure is activated through bolt connections.

Scaffold couplers in accordance with EN 74-1 or EN 74-2 are the most common form of detachable connectors in scaffolding. They usually provide an interference fit between scaffold tubes. Couplers are

Telescopic and non-telescopic props made of steel in accordance with EN 1065 or aluminium in accordance with EN 16031 are used on construction sites as temporary vertical supports during construction

Dust separators are used in chimneys to reduce the dust particle content of flue gases resulting from the combustion of solid fuels. Heating appliances, chimneys

Mastic or roller-compacted asphalt sealing layers are used in storage and filling facilities for manure, slurry and silage effluent (MSS facilities) and biogas storage and filling facilities (biogas S