Construction products detail
Other types of external thermal insulation composite systems (ETICS)
External thermal insulation composite systems, or ETICS for short, are multi-layer systems used to insulate the external wall of a building. They consist of insulation boards bonded to the substrate using adhesive mortar and additionally fixed with mechanical fixings (anchors, profiles etc.) and a rendering system comprised of a reinforced base coat and a decorative finishing coat.
The ETICS described here differ from the other ETICS categories presented. One common type is systems for improving the energy performance of an already existing ETICS on mineral substrates (retrofitting). These are always mechanically fixed and additionally bonded to the substrate. Insulation products made of expanded polystyrene (EPS) and mineral wool can be used.
If expanded polystyrene is used as an insulation product, special constructive fire protection measures need to be observed.
Regulatory framework
In this work area, DIBt grants national technical approvals (abZ) and/or general construction technique permits (aBG).
National procedure
A national technical approval (abZ) and/or oder general construction technique permit (aBG) is granted upon application (see Model Building Code (MBO), Sections 16a(2) and18(2) and (4)). This also applies to amendments and supplements to, or renewals of existing approvals and/or construction technique permits.
No formal requirements apply. The following information is needed: name and address of the applicant, description of the product and/or construction technique and its field of use or application, type of decision required (new decision, amendment or supplement to, or renewal of, an existing decision).
Please feel free to use the template below.
- pdf-Datei Application for a national technical approval and/or construction technique permit (3 pages ) Version: January 2018; Application form
- pdf-Datei Application for amendment / supplementation / renewal of a national technical approval and/or construction technique permit (4 pages ) Version: January 2018; Application form
- pdf-Datei Guideline: How to provide drawings for national technical approvals and general construction technique permits (5 pages ) Version: July 2017
Subject concerned | Applicant | Decision no. |
Validity
from / to |
---|---|---|---|
Wärmedämm-Verbundsystem mit Mineraldämmplatten "poratec Therm-L" | Veit Dennert KG Baustoffbetriebe Hauptstraße 1 96191 Viereth | Z-33.49-1061 |
Z:
01.03.2023 G: 01.03.2025 |
Bauart zur Aufdopplung von Wärmedämm-Verbundsystemen (WDVS) auf bestehende Wärmedämm-Verbundsysteme oder Holzwolle-Leichtbauplatten | Caparol Farben Lacke Bautenschutz GmbH Roßdörfer Straße 50 64372 Ober-Ramstadt | Z-33.49-1071 |
Z:
02.09.2022 G: 03.09.2027 |
Bauart zur Aufdopplung von Wärmedämm-Verbundsystemen (WDVS) auf bestehende Wärmedämm-Verbundsysteme oder Holzwolle-Leichtbauplatten | alsecco GmbH Kupferstraße 50 36208 Wildeck | Z-33.49-1072 |
Z:
19.10.2022 G: 18.10.2027 |
Bauart zur Aufdopplung von Wärmedämm-Verbundsystemen (WDVS) auf bestehende Wärmedämm-Verbundsysteme oder Holzwolle-Leichtbauplatten | Saint-Gobain Weber GmbH Schanzenstraße 84 40549 Düsseldorf | Z-33.49-1073 |
Z:
21.10.2019 G: 28.10.2024 |
Bauart zur Aufdopplung von Wärmedämm-Verbundsystemen (WDVS) auf bestehende Wärmedämm-Verbundsysteme oder Holzwolle-Leichtbauplatten | ALLIGATOR FARBWERKE GmbH Markstraße 203 32130 Enger | Z-33.49-1076 |
Z:
21.09.2021 G: 13.07.2026 |
Bauart zur Aufdopplung der Wärmedämm-Verbundsysteme (WDVS) "Brillux WDV-System EPS Prime" und "Brillux WDV-System MW Top" auf bestehende Wärmedämm-Verbundsysteme oder Holzwolle-Leichtbauplatten | Brillux GmbH & Co. KG Weseler Straße 401 48163 Münster | Z-33.49-1117 |
Z:
20.06.2019 G: 20.06.2024 |
Wärmedämm-Verbundsystem mit KlebeAnker "Baumit SuperDämmfassade" | Baumit GmbH Reckenberg 12 87541 Bad Hindelang/Allgäu | Z-33.49-1190 |
Z:
09.02.2022 G: 09.02.2027 |
Bauart zur Aufdopplung von Wärmedämm-Verbundsystemen (WDVS) auf bestehende Wärmedämm-Verbundsysteme | SAKRET Bausysteme GmbH & Co. KG Königsberger Straße 35 41460 Neuss | Z-33.49-1193 |
Z:
28.02.2020 G: 28.02.2025 |
Bauart zur Aufdopplung von Wärmedämm-Verbundsystemen (WDVS) auf bestehende Wärmedämm-Verbundsysteme oder Holzwolle-Leichtbauplatten | HAERING GmbH Mühlstraße 2-10 74199 Untergruppenbach-Unterheinriet | Z-33.49-1251 |
Z:
08.06.2020 G: 08.06.2025 |
Bauart zur Aufdopplung von Wärmedämm-Verbundsystemen (WDVS) auf bestehende Wärmedämm-Verbundsysteme oder Holzwolle-Leichtbauplatten | hawo GmbH Hunsrückstraße 11 64646 Heppenheim | Z-33.49-1441 |
Z:
28.08.2019 G: 28.08.2024 |
Bauart zur Aufdopplung von Wärmedämm-Verbundsystemen (WDVS) auf bestehende Wärmedämm-Verbundsysteme oder Holzwolle-Leichtbauplatten | Verband für Dämmsysteme, Putz und Mörtel e. V. Reinhardtstraße 14 10117 Berlin | Z-33.49-1505 |
Z:
06.01.2021 G: 17.04.2024 |
Wärmedämm-Verbundsystem "Baumit onTop Fassade XS 022" zur Aufdopplung auf bestehende Wärmedämm-Verbundsysteme | Baumit GmbH Reckenberg 12 87541 Bad Hindelang/Allgäu | Z-33.49-1548 |
Z:
15.10.2021 G: 15.10.2026 |
Wärmedämm-Verbundsystem mit angeklebten Mineralwolle-Platten "StoTherm Mineral CAT" | Sto SE & Co. KGaA Ehrenbachstraße 1 79780 Stühlingen | Z-33.49-1679 |
Z:
24.07.2019 G: 24.07.2024 |
Wärmedämm-Verbundsystem mit angeklebten Mineralwolle-Platten für die Anwendung auf Plattenwerkstoffen in Holzbauart "StoTherm Mineral CAT im Holzbau" | Sto SE & Co. KGaA Ehrenbachstraße 1 79780 Stühlingen | Z-33.49-1683 |
Z:
09.02.2022 G: 26.10.2025 |
Wärmedämm-Verbundsystem mit gedübelten Mineralwolle-Dämmplatten für die Anwendung auf massiven mineralischen Untergründen "weber.therm circle" | Saint-Gobain Weber GmbH Schanzenstraße 84 40549 Düsseldorf | Z-33.49-1731 |
Z:
22.05.2023 G: 23.05.2025 |
Wärmedämm-Verbundsystem "Knauf WARM-WAND Duo" zur Aufdopplung auf bestehende Wärmedämm-Verbundsysteme oder Holzwolle-Leichtbauplatten | Knauf Gips KG Am Bahnhof 7 97346 Iphofen | Z-33.49-981 |
Z:
23.10.2023 G: 23.10.2028 |