Wood flooring

With wood flooring, the floor covering is made of wood.

Various designs are possible for parquets. In general, wood elements are arranged in specific patterns. Variants range from solid parquets to multilayer parquets consisting of solid wood or wood-based material substrates and a hardwood wear layer. Additional wood flooring types include, e.g., wood paving, coarse and fine particleboard flooring and veneer flooring.

Regulatory framework

Wood floorings are relevant from a regulatory point of view if they are used in accommodation areas (indoor spaces regularly occupied by people) or adjoining rooms that are not partitioned from them because emissions from these products have an influence on indoor air quality. This does not apply to untreated solid wood flooring.

For these products, national technical approvals were granted until October 2016 for verification of health protection. As a result of the implementation of the judgement of the European Court of Justice of 16 October 2014 in case C-100/13, national technical approvals are no longer granted for these products if they bear the CE marking on the basis of the Construction Products Regulation (Regulation (EU) No 305/2011). The products may not be marked with the national conformity mark. Approvals for which the period of validity has not yet expired are listed below. They can be used on a voluntary basis to prove fulfilment of the regulatory requirements.

In accordance with the Administrative Provisions – Technical Building Rules (VV TB) of the federal states, requirements pertaining to the release of volatile organic compounds apply, cf. the common model MVV TB, Part A 3.2.1 and Annex 8.

Since no performance regarding release of volatile organic compounds (VOCs) can be declared for wood flooring in accordance with EN 14342:2013 based on said standard. To declare such performance related to the release of VOCs, European Technical Assessment (ETA) can be requested

Also, evaluations verifying the fitness for use of wood flooring in terms of health protection can be issued in accordance with MVV TB, Section D 3 'Technical documentation pursuant to Section 85a(2) point (6) MBO'.

In this work area, DIBt prepares European Technical Assessments (ETAs) and voluntary evaluations for verifying the fitness for use of the products in terms of health protection.

Principles, guidance, recommendations

Application forms

European Technical Assessment (ETA)

To start the ETA procedure, please submit the form below. We will then check if the prerequisites for issuing an ETA are met, i.e., in particular, if the product is not fully covered by an existing harmonised standard. If the prerequisites are met, we will check whether a European Assessment Document (EAD) covering the requested assessment scope already exists or still needs to be developed. If an EAD needs to be developed or amended, a complete technical file needs to be established before the procedure can begin.

Form for requesting a European Technical Assessment (ETA) (2 pages)

Last updated: 16 June 2022

Voluntary evaluations of fitness for use

Where the relevant harmonised standard is incomplete, economic actors can provide product performance information on a voluntary basis. DIBt offers independent validation and confirmation of such additional performance information in the form of a voluntary evaluation of fitness for use.

Auftrag zur Erstellung eines Gutachtens (4 pages)

über die Einhaltung bauaufsichtlicher Anforderungen an bauliche Anlagen bei Einbau des bezeichneten Bauprodukts

Dr Astrid Gräff
Head of Section – Health Protection, Indoor Hygiene, Protection Against Radiation from Construction Products

Phone +49 30 78730-434
Email alu(at)dibt(.)de

Legal reference documents

Testing, certification, inspection