Search

Barrier glazing

of glass as well as floor-to-ceiling glazing. Usually a glass structure which provides fall protection contains a laminated safety glass which has a favrouable fracture behaviour due to the interlayer used [...] Barrier glazing is glazing designed to prevent people from falling to a lower level. In the event of impact on the glazing, the risk of injury is supposed to be low. Furthermore, the lower-lying traffic

Surface protection systems

zone) of de-icing agents. OS 11a (OS F a) / OS 11b (OS F b): Coating with increased dynamic crack-bridging capacity for surfaces accessible by foot or vehicle OS 11a (OS F a) / OS 11b (OS F b) is applied [...] Betonbauteile von Wasserbauwerken, ZTV-W LB 219), a distinction is made between the following surface protection systems: OS 1 (OS A): Hydrophobic treatment OS 1 (OS A) is applied to reduce water absorption in [...] de-icing agents. OS 5a (OS DII) / OS 5b (OS DI): Coating with low crack-bridging capacity for surfaces not accessible by foot or vehicle (with scratch coating or levelling filler) OS 5a (OS DII) / OS 5b (OS

Fixings bonded to the roof waterproofing

roof waterproofing thus takes on a structural role in the transfer of loads, for which it is not designed. As a matter of fact, the roof waterproofing as such is not a load-bearing element. Furthermore

Walk-on glazing, accessible glazing and glazing with fall-through protection

multiple panes with interlayers. It is common for the top pane to be designed as what is called a wear layer, i.e. a layer which can be destroyed without degrading the load-bearing capacity. Glass in construction [...] Walk-on glazing is designed for foot traffic. A vertical imposed load of maximum 5 kN/m 2 is assumed under normal use conditions. Glazing accessible for maintenance and glazing with fall-through protection

Z-23.15-2104

Wärmedämmsysteme unter Verwendung der Holzwolle-Mehrschichtplatten "Tektalan A2-Basic", "Tektalan A2-Basic [1.0]", "Tektalan A2-SmartTec", "Tektalan A2-SmartTec [1.0]", "Tektalan A2-SmartTec alpha", "Tektalan A2-SmartTec [1.0] alpha", "Tektalan A2-Lumax", "Tektalan A2-Lumax [1.0]", "Tektalan Basic" und "Tektalan Basic [1.0]"

Z-43.12-134

Baustoffe und Bauteile für Speicher-Einzelfeuerstätten mit den Bezeichnungen "Rondolino 144 A/B", "Rondolino 167 A/B", "Rondolino 177 A/B" "Rondolino 210 A/B" und "Rondolino loft 144 A/B" sowie "Rondolino loft 177 A/B"

Z-51.3-208

Lüftungsgerät mit Wärmerückgewinnung a²

Z-51.3-210

Lüftungsgerät mit Wärmerückgewinnung a³

Z-158.10-75

Verlegeunterlage "MONDO EVERLAY A"

Anchor channels

An anchor channel is a fastening system that consists of a channel profile with permanently attached anchors and channel bolts. The channel profile with the anchors is fastened to the formwork prior to [...] to concreting and then cast in. The anchor channel is anchored in concrete through a form-fit between the anchor and the concrete member. The element to be attached is later fastened to the embedded channel

Leakage detection systems in MSS and biogas facilities

(biogas SF facilities), e.g. under storage tanks or basin linings. A leakage detection system usually consists of a sealing membrane with a leakage control device and other accessories (e.g. load-distributing

Z-56.429-916

Beschichtete Glasfilamentgewebe "Protex 600.1 A2", "Protex 1100.1 A2", "Protex 600 S A2", "Modutex 600 A2", "Ecotex 1100 A2" und beidseitig mit Aluminiumfolie kaschiertes und mit Stahldraht verstärktes zweischichtiges Glasfilamentgewebe "Heliotex" als nichtbrennbare Baustoffe

Special fire-resistant components in ventilation technology – duct components

duct components may only be used in a vertical design to prevent the spread of fire from storey to storey for the fire-resistance duration verified for the assembly as a whole. Construction products for fire [...] fire-resistant components in ventilation technology are service duct components consisting mainly of a supporting tray, cladding, supply and discharge lines, electrical cables and ventilation ducts – including

Z-33.44-63

Wärmedämm-Verbundsysteme mit angeklebten Mineralwolle-Lamellen "weber.therm A 100 MW-L WDVS" "weber.therm A 100 MW-L DP WDVS" "weber.therm A 100 MW-L Speedy WDVS" "weber.therm A 100 MW-L Speedy DP WDVS" "weber.therm A 200 MW-L WDVS" "weber.therm A 200 MW-L DP WDVS" "weber.therm A 200 MW-L Speedy WDVS" "weber.therm A 200 MW-L Speedy DP WDVS"

Composite insulation elements

mechanically fixed directly to the load-bearing wall as external wall cladding. A composite insulation element consists of a thermal insulation layer and an outer weather protection layer. Thermal and sound

Z-33.43-201

Wärmedämm-Verbundsystem mit angeklebtem und angedübeltem Wärmedämmstoff "einzA WDVS Polystyrol PS-D" "einzA WDVS Steinwolle MW-D2" "einzA WDVS Lamelle ML-D2"

Closures and closure systems for inspection openings

opening are used to seal revision openings in fire-resistant service ducts or suspended ceilings inside a building or structural work. They prevent fire or smoke from spreading via the revision opening from [...] suspended ceiling to the area below. Closures or closure systems for inspection openings consist mainly of a frame and the leaf or leaves. Closures and closure systems for revision openings are factory-made, need [...] need to close tightly all around; they may only be opened from the outside (i.e. from the room) with a special tool or key or similar. By definition, closures for inspection openings have one or two leaves

ETA-25/0390

einzA Schimmelschutz Systemplatte einzA Schimmelschutz Laibungsplatte einzA Schimmelschutz Keilplatte

Z-33.43-1783

Wärmedämm-Verbundsysteme mit angeklebten und angedübelten Wärmedämmstoffen "einzA WDVS Polystyrol EPS-D" "einzA WDVS Mineralwolle MW-D" "einzA WDVS Lamelle MWL-D"

Z-33.43-1751

Wärmedämm-Verbundsysteme mit angedübelten und angeklebten Wärmedämmstoffen "einzA WDVS Polystyrol PS-D" "einzA WDVS Steinwolle MW-D" und "einzA WDVS Lamelle ML-D"

Z-156.601-951

Textile Bodenbeläge nach DIN EN 14041 "ecmodular"

Stainless steels

this chromium content level, the steels are able to form a complete surface layer of chromium oxide. This oxide layer or passive film constitutes a 'natural' barrier against corrosion, because the film does [...] given above. By the way, following the steel classification set out in EN 10020, stainless steels form a class of their own and are not part of the 'special steel' class. Materials for metal construction

Search for »a.a«

20068 search results