Smoke detection and triggering devices are used for controlling and triggering fire and smoke dampers in air ducts of HVAC systems. Following smoke detection and the corresponding signalling, the fire

Fire-resistant air ducts that are assembled on site from CE-marked fire protective boards covered by a European Technical Assessment (ETA) issued on the basis of a European Assessment Document (EAD) a

Fire protection systems mainly consist of straight air duct sections, fittings, seals, connectors and fasteners, classified or unclassified wraps and shut-off devices for fire and smoke etc. They may

Fire dampers are installed in air ducts of ventilation systems in the area of fire-resistant separating elements to prevent the spread of fire and smoke along the ductwork to other fire compartments f

With linearly supported glazing, the glass panes are continuously fixed via a linear mechanical glass support (e.g. profile) with a glass insertion depth. The glazing system is installed in such a man

With structural sealant glazing, glass panes are bonded to frame profiles at the factory (primarily using silicone adhesive and with a linear adhesive bead). This prefabricated structural sealant glaz

Parquet adhesives are used across large surface areas to bond parquet or wood flooring to the substrate. They can consist of one or two components. Acrylate dispersions, epoxides, polyurethanes, silan

Grease separators serve to separate grease from commercial wastewater. Separator systems

Separator systems for light liquids serve to separate light liquids of mineral origin from commercial wastewater. Separator systems

Fire-resistant enclosures for electric panels separate measuring devices and electric panels from required stairwells and spaces between required stairwells and exits or encase electric panels for saf

Temporary structures are repeatedly erected and taken down. They include, for example, bleachers, tents and rides for fairgrounds. Temporary structures are special structures within the meaning of Sec

Membrane structures are composed of thin, fabric-like materials. Due to their low self-weight, they are suitable for spanning large areas. They are used, e.g., as space-dividing, thermally insulating

Gabions are wire mesh boxes filled with graded aggregate. Individual gabions are assembled via stacking and connecting to form gabion assemblies. These assemblies serve, for example, to stabilise esca

Concrete constituents

A plastic fastener consists of a plastic sleeve and a steel or plastic expansion element. The plastic fastener is placed into a pre-drilled hole in the base material and anchored through expansion of

Space frames are three-dimensional frame structures which serve as roof or building structures. They usually consist of frame members (tubes) and nodes. At least two frame members are joined at a node

After its digital debut, the DIBt Annual Report 2023/2024 is now available in English. The DIBt Annual Report 2023/2024 is now available in the English language. Following its digital debut in the Ger

Coatings (including inner coatings) and linings are used for creating liquid-tight sealings for collecting trays, collecting rooms and surfaces in storage and filling facilities for manure, slurry and

To create (load-bearing) surface seals in storage and filling facilities for manure, slurry and silage effluent (MSS facilities) and biogas storage and filling facilities (biogas SF facilities), liqui

Drainage pumps for drainage systems are used for lifting greywater or foul water, which can contain different components of organic, inorganic or mineral origin. Drainage pumps for drainage systems ar

The term surface protection system covers a range of different types and designs. Besides polymer-containing coatings for concrete structures, organosilicon compounds can also be used as water repelle

Grout is used for filling ducts for internal bonded tendons or sheaths for external tendons. It serves to establish a form and interference fit between the concrete and the prestressing wires and to p

Injection products and systems are used for repairing concrete structures. A distinction is made between different repair objectives. The filling objective 'Closing (crack width control by filling)' i

Racking systems are structures for storing and retrieving goods in warehouses. The goods to be stored are usually placed on pallets or in grid boxes. Metal products and construction techniques

A hold-open device is a system of devices or device combinations suitable for the controlled disabling of the function of closing devices. Hold-open devices may be used on fire doors, smoke control do