With their very low thermal conductivities, insulation products play an important role in thermal insulation and in improving the energy performance of buildings. A multitude of different materials ar

For these facade systems, the external wall cladding is fixed mechanically to the subframe, e.g. with the help of screws, rivets or clip fasteners. The facade systems can be executed as ventilated or

Translucent roof or wall systems are composed of single- or multi-layer flat or curved plastic sheets generally supported by aluminium support profiles and their fasteners. They are used both for roof

Facade systems with bonded facade cladding are ventilated external wall claddings where the cladding panels are bonded to the subframe profiles using an interference fit. The subframe is made of metal

Chimneys for solid fuels serve to discharge flue gases from the combustion of solid fuels into the outside atmosphere via an outlet above roof level. They can also be used to discharge flue gases from

Cross-sectional reductions for existing chimneys are used for renovation and/or modernisation. The purpose may be to upgrade the chimney for operation under wet conditions or adapt the cross section o

Catalysts are used in firing systems to optimise the combustion processes and reduce the amount of harmful flue gas substances produced. Heating appliances, chimneys

Various construction products that serve as safety devices within the meaning of water legislation and contribute to preventing damage to water bodies are referred to as 'special fittings for tanks fo

Closures and closure systems for inspection opening are used to seal revision openings in fire-resistant service ducts or suspended ceilings inside a building or structural work. They prevent fire or

For penetration-free fixing of photovoltaic systems or fall protection to the roof, the fixings can be bonded or welded to the roof waterproofing membrane. The roof waterproofing thus takes on a struc

Walk-on glazing is designed for foot traffic. A vertical imposed load of maximum 5 kN/m 2 is assumed under normal use conditions. Glazing accessible for maintenance and glazing with fall-through prote

Barrier glazing is glazing designed to prevent people from falling to a lower level. In the event of impact on the glazing, the risk of injury is supposed to be low. Furthermore, the lower-lying traff

With linearly supported glazing, the glass panes are continuously fixed via a linear mechanical glass support (e.g. profile) with a glass insertion depth. The glazing system is installed in such a man

Overhead glazing (also known as 'horizontal glazing') is understood to be glazing with an angle of inclination of more than 10° with respect to the vertical plane. With overhead glazing, it is assumed

With point supported glazing, the glass pane is mechanically fixed to the substructure either via point fasteners installed in drilled holes or via clamps (edge clamps). Point supported glazing is use

With structural sealant glazing, glass panes are bonded to frame profiles at the factory (primarily using silicone adhesive and with a linear adhesive bead). This prefabricated structural sealant glaz

Limit switches are safety devices within the meaning of water legislation, installed in tank vehicles and acting together with overfill prevention devices to interrupt the filling operation before the

Overfill prevention devices are safety devices within the meaning of water legislation that interrupt the filling operation or trigger an audible/visual alarm before the maximum permitted filling leve

A fire-resistant damper of special construction technique and application is a construction technique for sealing fire compartments. It mainly consists of a shut-off device integrated into a fire-resi

Amalgam separators serve to treat wastewater containing amalgam residues from treatment units in dental practices. Separator systems

Leakage detection systems are used for detecting leaks in storage and filling facilities for manure, slurry and silage effluent (MSS) and biogas storage and filling facilities (biogas SF facilities),

Sealing and monitoring systems (with plastic membranes) for use in storage, filling and handling facilities for substances hazardous to water (SFH facilities) usually consist of a multi-layer sealing

Plastic/sealing sheets and membranes for use in storage, filling and handling facilities for substances hazardous to water (SHF facilities) are manufactured to a specific thickness, laid loosely on th

Coating materials as well as coating and sealing systems are used for sealing collecting trays, collecting rooms and surfaces in storage, filling and handling facilities for substances hazardous to wa

Inner coatings (as partial or full surface coatings) are applied to the inner surfaces of stationary steel tanks for the storage of liquids hazardous to water to make them liquid-tight. Similarly, the