Construction products detail

Corrosion protection of metallic materials

Corrosion protection systems are applied to the surfaces of metallic materials of low corrosion resistance. The primary goal is to extend the fields of use of such materials to more corrosive environments. Possible uses will depend on the corrosion resistance that can be reached. As a side effect, the applied protection layers can serve aesthetic purposes (e.g. in terms of colour or structure).

Generally, a distinction is made between metallic coatings (plating), such as galvanisation, and organic coatings, such as multi-layer finishes. A combination of both is called 'duplex coating', where the finish is added on top of the plating. There are also composite coatings, usually made of metallic particles in an organic binder matrix, such as zinc-lamella coatings.

Furthermore, any kind of sheathing, such as tapes, films or tubes, can be taped, wrapped or pulled over the material as a corrosion protection system.

Regulatory framework

DIBt grants national technical approvals (abZ) for corrosion-protected products as long as the product

  • is not covered or is not fully covered by a harmonised product standard
  • deviates significantly from the Technical Building Rules (cf. MVV TB, in particular Chapter C 2) or
  • neither Technical Building Rules nor generally recognised technical rules exist for the product.

European Technical Assessments (ETAs) can also be issued for these products.

DIBt grants general construction technique permits (aBG) for applications comprising these products for which there are no conclusive technical rules regarding design and execution.

Please also refer to the relevant provisions of the federal states following the Model Administrative Provisions – Technical Building Rules (MVV TB).

Die Ausstellung einer Europäischen Technischen Bewertung (ETA) setzt das Vorhandensein eines unter den Europäischen Bewertungsstellen (TAB) abgestimmten Bewertungsdokuments (EAD) voraus. Sofern zum Zeitpunkt der Antragstellung für das geplante Bauprodukt noch kein oder ein nicht vollständig zutreffendes EAD veröffentlicht ist, kann das DIBt dieses im Rahmen der Antragsbearbeitung erstellen bzw. das bestehende entsprechend ergänzen. Hinweise zum Verfahrensablauf finden Sie hier:

https://www.dibt.de/de/wir-bieten/zulassungen-etas-und-mehr/europaeische-technische-bewertung-eta/

National procedure

A national technical approval (abZ) and/or oder general construction technique permit (aBG) is granted upon application (see Model Building Code (MBO), Sections 16a(2) and18(2) and (4)). This also applies to amendments and supplements to, or renewals of existing approvals and/or construction technique permits.

No formal requirements apply. The following information is needed: name and address of the applicant, description of the product and/or construction technique and its field of use or application, type of decision required (new decision, amendment or supplement to, or renewal of, an existing decision).

Please feel free to use the template below.

European Technical Assessment (ETA)

To start the ETA procedure, please submit the form below. We will then check if the prerequisites for issuing an ETA are met, i.e., in particular, if the product is not fully covered by an existing harmonised standard. If the prerequisites are met, we will check whether a European Assessment Document (EAD) covering the requested assessment scope already exists or still needs to be developed. If an EAD needs to be developed or amended, a complete technical file needs to be established before the procedure can begin.

aBG

Z
new decision
E
supplement
Ä
amendment
V
renewal
G
valid until
Subject concerned Applicant Decision no. Validity
from / to
Stahlbauteile mit Pulver-Beschichtungssystemen für Stahlkonstruktionen Goldbeck GmbH Ummelner Straße 4-6 33649 Bielefeld Z-30.11-22 Z: 25.11.2020
G: 25.11.2025
Stahlbänder mit den kontinuierlich aufgebrachten Duplex-Korrosionsschutzsystemen "Colorcoat® PE15 on Z150", "Colorcoat® PE15 on Magizinc® ZM70" und "Colorcoat® PE15 on Magizinc® ZM100" für dünnwandige kaltgeformte Bauteile Tata Steel Wenckebachstraat 1 1951 JZ VELSEN-NOORD NIEDERLANDE Z-30.11-27 Z: 06.08.2020
G: 06.08.2025
Metalldiffusionsüberzug Greenkote Typ PM-1 für Verbindungselemente und Bauteile aus Stahl Greenkote (israel) Ltd. (C/O Yossi Shemesh) 35 Shemesh St. CAESAREA 3079355 ISRAEL Z-30.11-29 Z: 27.06.2019
G: 27.06.2024
Feuerveredelte Stahlbleche mit einem Duplex-Korrosionschutz-System aus dem Zink-Magnesium-Überzug ZM Ecoprotect® und der Beschichtung pladur® für die Herstellung dünnwandiger kaltgeformter Bauteile thyssenkrupp Steel Europe AG Kaiser-Wilhelm-Straße 100 47166 Duisburg Z-30.11-30 Z: 17.01.2022
G: 30.09.2026
Korrosionsschutzverfahren "ATIS Cableskin®" für Stahlseile und Stahlbauteile DYWIDAG-Systems International GmbH Neuhofweg 5 85716 Unterschleissheim Z-30.11-41 Z: 28.11.2022
G: 28.11.2027
Mit den Korrosionsschutzsystemen "FolaSal® StronSal®" geschützte Stahlbänder für die Herstellung dünnwandiger kaltgeformter Bauteile Salzgitter Flachstahl GmbH Eisenhüttenstraße 99 38239 Salzgitter Z-30.11-42 Z: 01.11.2019
G: 01.11.2024
Mit dem metallischen Überzug "Magnelis®" korrosionsgeschützte Stahlbänder für die Herstellung dünnwandiger kaltgeformter Bauteile ARCELORMITTAL FLAT CARBON EUROPE 24-26, Boulevard d'Avranches 1160 LUXEMBOURG LUXEMBURG Z-30.11-51 Z: 06.09.2021
G: 17.09.2024
Kontinuierlich schmelztauchveredelte Flacherzeugnisse aus Stahl mit der Zink-Magnesium-Legierung "ZM Ecoprotect®" für die Herstellung kaltgeformter Bauteile thyssenkrupp Steel Europe AG Kaiser-Wilhelm-Straße 100 47166 Duisburg Z-30.11-54 Z: 12.12.2023
V: 12.12.2023
G: 30.12.2026
Mit dem Dünnschicht-Stückverzinkungsverfahren microZINQ® 5 feuerverzinkte Bauteile ZINQ® Technologie GmbH An den Schleusen 6 45881 Gelsenkirchen Z-30.11-60 Z: 12.10.2020
G: 12.10.2025
Mit einem Zink-Aluminium-Magnesium-Überzug (Optigal / ZM-Evolution) und einer zusätzlichen organischen Beschichtung korrosionsgeschützte Stahlbänder für die Herstellung dünnwandiger kaltgeformter Bauteile ArcelorMittal 24-26 Boulevard d'Avranches 1160 LUXEMBOURG LUXEMBURG Z-30.11-61 Z: 01.07.2019
G: 01.07.2024
Korrosionsschutzband DYNA Protect® Bar für Spannstahlstäbe DYWIDAG-Systems International GmbH Neuhofweg 5 85716 Unterschleissheim Z-30.11-71 Z: 21.07.2021
G: 21.07.2026
Wuppermann Zink-Magnesium-Überzug "WTopCor" Wuppermann Stahl GmbH Gußstahlwerkstraße 23 8750 Judenburg ÖSTERREICH Z-30.11-74 Z: 08.02.2023
G: 12.02.2028
Subject concerned Applicant Decision no. Issued on
Corrosion protection system "ATIS Cableskin" Alpin Technik und Ingenieurservice GmbH Plautstraße 80 04179 Leipzig DEUTSCHLAND ETA-13/0171 14.05.2019