Safety devices with position monitoring for combined operation of ventilation systems and non-room-sealed heating appliances

Stand-alone safety devices for monitoring the opening state of a window ensure that ventilation systems and non-room-sealed heating appliances can be operated safely in combined operation mode. If the defined minimum opening gap of the window is not adhered to, the safety device switches the ventilation unit off.

Regulatory framework

In this work area, DIBt grants national technical approvals (abZ) and/or general construction technique permits (aBG). European Technical Assessments (ETAs) can also be issued for corresponding products.

Please also note the applicable design and execution rules for ventilation technology, cf. in particular MVV TB, Parts A and B and the following information and technical rules.

Technical rules

Muster-Feuerungsverordnung (MFeuV)

Stand: September 2007, geändert durch Beschluss der Fachkommission Bauaufsicht vom 28.01.2016 und 27.09.2017; Fachkommission Bauaufsicht der Bauministerkonferenz

Application forms

National procedure

A national technical approval (abZ) and/or oder general construction technique permit (aBG) is granted upon application (see Model Building Code (MBO), Sections 16a(2) and18(2) and (4)). This also applies to amendments and supplements to, or renewals of existing approvals and/or construction technique permits.

No formal requirements apply. The following information is needed: name and address of the applicant, description of the product and/or construction technique and its field of use or application, type of decision required (new decision, amendment or supplement to, or renewal of, an existing decision).

Please feel free to use the template below.

Application for a national technical approval and/or construction technique permit (3 pages)

Version: January 2018; Application form

Application for amendment / supplementation / renewal of a national technical approval and/or construction technique permit (4 pages)

Version: January 2018; Application form

Guideline: How to provide drawings for national technical approvals and general construction technique permits (5 pages)

Version: July 2017

European Technical Assessment (ETA)

To start the ETA procedure, please submit the form below. We will then check if the prerequisites for issuing an ETA are met, i.e., in particular, if the product is not fully covered by an existing harmonised standard. If the prerequisites are met, we will check whether a European Assessment Document (EAD) covering the requested assessment scope already exists or still needs to be developed. If an EAD needs to be developed or amended, a complete technical file needs to be established before the procedure can begin.

Form for requesting a European Technical Assessment (ETA) (2 pages)

Last updated: 16 June 2022

  • abZ/aBG
  • Z = new decision | E = supplement | Ä = amendment | V = renewal | G = valid until
    Subject concerned Applicant Decision no. Validity
    from / to
    Funk-Fensterkontaktschalter FDS 200 - Sicherheitseinrichtung zur Gewährleistung eines gefahrlosen gemeinsamen Betriebes von Lüftungsanlagen und raumluftabhängigen Feuerstätten

    Elektrotechnik Schabus GmbH & Co. KG

    Baierbacher Sraße 150

    83071 Stephanskirchen

    Z-85.2-10 Z: 10.01.2022
    G: 10.01.2027
    Funk-Abluftsteuerung FDS 100 - Sicherheitseinrichtung zur Gewährleistung eines gefahrlosen gemeinsamen Betriebes von Lüftungsanlagen und raumluftabhängigen Feuerstätten

    Elektrotechnik Schabus GmbH & Co. KG

    Baierbacher Sraße 150

    83071 Stephanskirchen

    Z-85.2-11 Z: 25.01.2022
    G: 25.01.2027
    Kabel-Abluftsteuerungen vom Typ "KDS 110 und KDS 210" - Sicherheitseinrichtungen zur Gewährleistung eines gefahrlosen gemeinsamen Betriebes von Lüftungsanlagen und raumluftabhängigen Feuerstätten

    Elektrotechnik Schabus GmbH & Co. KG

    Baierbacher Sraße 150

    83071 Stephanskirchen

    Z-85.2-14 Z: 25.06.2018
    G: 18.06.2023
    Sicherheitseinrichtung zur Gewährleistung eines gefahrlosen gemeinsamen Betriebes von Lüftungsanlagen und raumluftabhängigen Feuerstätten vom Typ Funk-Ablufsteuerung "AS-5120"

    Protector GmbH

    An den Kolonaten 37

    26160 Bad Zwischenahn

    Z-85.2-21 Z: 25.06.2018
    G: 25.06.2023
    Funk-Abluft-Sicherheitsschalter "BL220F" und "BL220FI" der Baureihe "BROKO" und "HARK" als Sicherheitseinrichtungen zur Gewährleistung eines gefahrlosen gemeinsamen Betriebes von Lüftungsanlagen und raumluftabhängigen Feuerstätten

    BROKO GmbH

    Elektroproduktion und Vertrieb

    Landshuter Straße 1

    84048 Mainburg

    Z-85.2-5 Z: 16.09.2019
    G: 16.09.2024
    Abluft-Sicherheitsschalter vom Typ "BL110K und BL110Ki" Sicherheitseinrichtung zur Gewährleistung eines gefahrlosen gemeinsamen Betriebes von Lüftungsanlagen und raumluftabhängigen Feuerstätten

    BROKO GmbH

    Elektroproduktion und Vertrieb

    Landshuter Straße 1

    84048 Mainburg

    Z-85.2-6 Z: 22.04.2021
    G: 22.04.2026

Ronny Schmidt
Head of Section – Combustion Appliances, Chimneys, Building Services

Phone +49 30 78730-473
Email rsi(at)dibt(.)de

Legal reference documents

Testing, certification, inspection