Glass fibre reinforced plastic (GFRP) rebars are one example of non-metallic rebars. They are serrated to ensure sufficient bonding with the concrete. Reinforcements made of glass fibre reinforced pla

Fire protection systems mainly consist of straight air duct sections, fittings, seals, connectors and fasteners, classified or unclassified wraps and shut-off devices for fire and smoke etc. They may

Grease separators serve to separate grease from commercial wastewater. Separator systems

Liquid applied roof waterproofing kits are usually multi-component systems and are applied in liquid form in multiple layers. After curing, they form the roof waterproofing. Waterproofing of buildings

Masonry wall elements are room-height and predominantly room-width prefabricated elements (including parapets and gables). The individual masonry wall elements are manufactured at the factory from mas

Smoke detection and triggering devices are used for controlling and triggering fire and smoke dampers in air ducts of HVAC systems. Following smoke detection and the corresponding signalling, the fire

External thermal insulation composite systems, or ETICS for short, are multi-layer systems used to insulate the external wall of a building. The ETICS consists of Insulating materials, a type of fixin

Soil nailing is a measure used to increase the tensile and shear strength of the soil to such an extent that the nailed soil can be considered as a monolithic block for verification purposes. Soil nai

Fire-resistant enclosures for electric panels separate measuring devices and electric panels from required stairwells and spaces between required stairwells and exits or encase electric panels for saf

An electric panel forms part of the electrical wiring system for safety systems required under the Building Codes. The functions of these systems must be maintained in case of fire for the required du

External thermal insulation composite systems, or ETICS for short, are multi-layer systems used to insulate the external wall of a building. The ETICS consists of insulation boards, a type of fixing a

Special fire-resistant components in ventilation technology are service duct components consisting mainly of a supporting tray, cladding, supply and discharge lines, electrical cables and ventilation

Smoke dampers are shut-off devices for preventing the spread of smoke via air ducts. They shut automatically after being triggered by a triggering mechanism, which is actuated upon detection of smoke

Fire-resistant air ducts that are assembled on site from CE-marked fire protective boards covered by a European Technical Assessment (ETA) issued on the basis of a European Assessment Document (EAD) a

Separator systems for light liquids serve to separate light liquids of mineral origin from commercial wastewater. Separator systems

Spray polyurethane foam (SPF) roofing systems are composed of an in situ insulation layer made of spray polyurethane foam and a surface protection layer. The systems are used for roofs that are walk-o

For penetration-free fixing of photovoltaic systems or fall protection to the roof, the fixings can be bonded or welded to the roof waterproofing membrane. The roof waterproofing thus takes on a struc

Fire-protective fabrics coated with an intumescent material are used to wrap electrical cables and services to improve their reaction-to-fire performance and/or to impede the breakout and spread of a

Wood preservatives for preventive treatment are used to prevent infestation of wood and wood-based materials by insects, fungi and other wood-destroying organisms. Wood preservatives for curative trea

These special thermal insulation products may be used as thermal insulation or substitutes for masonry facing and thermal insulation on stationary heating appliances assembled on site (e.g. stoves and

These systems serve to treat stormwater run-off from transformer stations and retain insulating oil (transformer oil). Systems for limiting hydrocarbons in mineral oil containing wastewater

Falsework beam clamps are connectors in falsework in accordance with EN 12812 with a mechanical fit based on contact pressure and friction. The contact pressure is activated through bolt connections.

These floor systems are composed of prestressed precast slabs finished with a structurally contributing in situ concrete overlay. Construction techniques for floors and walls, precast concrete product

Masonry mortar or bonding agents serve to produce masonry from masonry units. In most cases, masonry mortars are covered by EN 998-2. Masonry

DIBt grants general construction technique permits (aBG) for floor and wall construction techniques which significantly deviate from the Technical Building Rules or for which no generally recognised t