With point supported glazing, the glass pane is mechanically fixed to the substructure either via point fasteners installed in drilled holes or via clamps (edge clamps). Point supported glazing is use

Punching shear reinforcements are special reinforcements used in place of stirrups or bent reinforcements to increase the punching shear resistance in the area of beam supports for reinforced concrete

Parquet adhesives are used across large surface areas to bond parquet or wood flooring to the substrate. They can consist of one or two components. Acrylate dispersions, epoxides, polyurethanes, silan

Universal adhesives are used across large surface areas to bond floor coverings to the substrate. They can consist of one or two components. Acrylate dispersions, epoxides, polyurethanes, silane-modif

primarily applied to interior walls, partitions or ceilings for decorative purposes. They can be made of a variety of materials (e.g. vinyl, foamed plastic, cork, glass fibres, coated paper etc.) and be made

Coatings (including inner coatings) and linings are used for creating liquid-tight sealings for collecting trays, collecting rooms and surfaces in storage and filling facilities for manure, slurry and

An anchor channel is a fastening system that consists of a channel profile with permanently attached anchors and channel bolts. The channel profile with the anchors is fastened to the formwork prior to [...] to concreting and then cast in. The anchor channel is anchored in concrete through a form-fit between the anchor and the concrete member. The element to be attached is later fastened to the embedded channel

devices made of plastic are especially suitable for liquids hazardous to water because they often have a more favourable corrosion behaviour than metal tanks and hence are resistant to various storage media

polyester resin) in their cured condition are thermosets and are used in construction products in a large variety of ways. Laminates made of these resins and strengthening materials (e.g. glass fibres)

needed in SFH facilities to fasten fixtures to the concrete sealing system. The fixings are composed of a fastening element (made of steel) and an injection mortar suitable for the concrete base material. Fixings

Prestressing steel wire is made of wire rod which is either manufactured by cold-forming and subjected to a finishing thermo-mechanical treatment or through hardening and subsequent tempering. Prestressing steels

play an important role in thermal insulation and in improving the energy performance of buildings. A multitude of different materials are currently available depending on the field of use. Some thermal

A plastic fastener consists of a plastic sleeve and a steel or plastic expansion element. The plastic fastener is placed into a pre-drilled hole in the base material and anchored through expansion of the

Telescopic and non-telescopic props made of steel in accordance with EN 1065 or aluminium in accordance with EN 16031 are used on construction sites as temporary vertical supports during construction

Falsework beam clamps are connectors in falsework in accordance with EN 12812 with a mechanical fit based on contact pressure and friction. The contact pressure is activated through bolt connections. Working

Semi-rigid sealing layers are used to create load-bearing surfaces in retaining systems, e.g. collecting rooms, collecting trays and surfaces, in storage, filling and handling facilities for substance

To create (load-bearing) surface seals for retaining systems, such as collecting trays, rooms or surfaces, in storage, filling and handling facilities for substances hazardous to water (SFH facilities

liquids hazardous to water to make them liquid-tight. Similarly, the inner surface can be lined with a rubber lining to make it liquid-tight. Inner coatings and linings for pipes and tanks for liquids hazardous

Prestressing steel bars are used in various prestressing systems for concrete structures. Prestressing steel bars are manufactured in hot rolling mills (by quenching, cold-drawing or additional temper

Mastic or roller-compacted asphalt sealing layers are used in storage, filling and handling facilities for substances hazardous to water (SFH facilities) to create load-bearing, liquid-tight, sealed s

Steel and steel composite sealing systems serve to make retaining systems such as collecting rooms, collecting trays and surfaces in storage, filling and handling facilities for substances hazardous t

Working scaffolds in accordance with DIN EN 12811‑1 serve as auxiliary equipment for reaching parts of the structure that would otherwise be difficult or impossible to access in order to perform work

Ancillary components and accessories comprise all construction products which, in addition to masonry units and mortar, are needed for the erection of masonry structures. These construction products a

Liquid applied roof waterproofing kits are usually multi-component systems and are applied in liquid form in multiple layers. After curing, they form the roof waterproofing. Waterproofing of buildings

Coating materials as well as coating and sealing systems are used for sealing collecting trays, collecting rooms and surfaces in storage, filling and handling facilities for substances hazardous to wa