secondary fires) into other compartments, such as storeys, apartments or occupancy units. The installation/application of the penetration seal is considered to be a construction technique from a regulatory

depending on the use scenario outlined above. The circuit integrity of the electric panel to be installed in the enclosure needs to be verified separately! Electric panels for safety systems

difference is measured either between the heating room (room where the heating appliance is placed or installed) and the connecting flue pipe or between the outside atmosphere and the heating room. If the pressure

components inside buildings or structural works (e.g. at the joint of two fire-resistant walls). The installed system prevents the spread of fire and smoke through the sealed joint, thus ensuring that the components

g plant and then straightened, bent and cut or just straightened and cut to standard lengths (installation lengths) in downstream processing operations carried out by a specialised bending company, a precast

fastening facade elements, external thermal insulation composite systems or outer masonry leaves. Post-installed fastening systems

hole prior to mortar injection and prevents the free flow of mortar into the brick voids. Post-installed fastening systems

thermoplastic membranes made of glass-fibre reinforced plastic or steel, which in most cases are pre-installed in the tank. The floors of large flat-bottom tank structures are mainly fitted with steel sealings

suspension cone / climbing cone) and, where necessary, a fixing screw or nut. The scaffold anchor is installed in the formwork and concreted in during the concreting of a new section. It is then used as a support

tanks on saddle supports and, for smaller tanks, cubic tanks with flat walls. For underground installation, mainly horizontal cylindrical tanks are used. Metal tanks, pipes and collecting devices for

Fixings that have been verified for resistance to various liquids hazardous to water and have been installed as specified in construction technique permits specifically addressing application in SFH facilities

hardening, the slabs in conjunction with the concrete overlay form the floor. Lattice girders are installed in the precast slabs to ensure sufficient load-bearing capacity and stiffness already during co

as fasteners (e.g. screws). Mounting and racking systems for photovoltaic systems are needed to install these systems on the roof or a supporting structure. Self-drilling or tapping screws and blind rivets

industrial installations — In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products — Part 1: Specification for the rigid foam dispensed system before installation 2018/C [...] industrial installations — In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products — Part 1: Specification for the rigid foam spray system before installation 2018/C 092/06 [...] ment and industrial installations — In-situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded and loose-fill products before installation 2018/C 092/06 EN

construction products as follows: 'Construction products: building materials, kits, components and installations manufactured to be permanently incorporated as wall, floor or ceiling constructions, including [...] monitoring radioactivity in the environment and for detecting radioactive emissions from nuclear installations (only available in German: Messanleitungen für die Überwachung der Radioaktivität in der Umwelt

introduced in parts of Italy, France and even Germany. Broader coverage of fatigue loads, low installation temperatures and the EAD for assessing service life performance for chemical anchors up to 100

construction product? Construction products are products, building materials, components and installations as well as construction kits which are manufactured in order to be permanently incorporated in

Ausgabe Juni 1985; Heft 2/1987, Mitteilungen IfBt; DIN Media GmbH pdf-Datei Information on the installation of anchor fastening (12 pages ) Version: October 2010 pdf-Datei Instandhaltung von Betonbauwerken

of the CPR provides that the construction product needs to be accompanied by instructions (for installation and use). A reference to other documents or a website (e.g. homepage of the manufacturer) attached