For penetration-free fixing of photovoltaic systems or fall protection to the roof, the fixings can be bonded or welded to the roof waterproofing membrane. The roof waterproofing thus takes on a struc

Walk-on glazing is designed for foot traffic. A vertical imposed load of maximum 5 kN/m 2 is assumed under normal use conditions. Glazing accessible for maintenance and glazing with fall-through prote

Barrier glazing is glazing designed to prevent people from falling to a lower level. In the event of impact on the glazing, the risk of injury is supposed to be low. Furthermore, the lower-lying traff

With linearly supported glazing, the glass panes are continuously fixed via a linear mechanical glass support (e.g. profile) with a glass insertion depth. The glazing system is installed in such a man

Overhead glazing (also known as 'horizontal glazing') is understood to be glazing with an angle of inclination of more than 10° with respect to the vertical plane. With overhead glazing, it is assumed

With point supported glazing, the glass pane is mechanically fixed to the substructure either via point fasteners installed in drilled holes or via clamps (edge clamps). Point supported glazing is use

With structural sealant glazing, glass panes are bonded to frame profiles at the factory (primarily using silicone adhesive and with a linear adhesive bead). This prefabricated structural sealant glaz

Limit switches are safety devices within the meaning of water legislation, installed in tank vehicles and acting together with overfill prevention devices to interrupt the filling operation before the

Overfill prevention devices are safety devices within the meaning of water legislation that interrupt the filling operation or trigger an audible/visual alarm before the maximum permitted filling leve

A fire-resistant damper of special construction technique and application is a construction technique for sealing fire compartments. It mainly consists of a shut-off device integrated into a fire-resi

Amalgam separators serve to treat wastewater containing amalgam residues from treatment units in dental practices. Separator systems

Leakage detection systems are used for detecting leaks in storage and filling facilities for manure, slurry and silage effluent (MSS) and biogas storage and filling facilities (biogas SF facilities),

Sealing and monitoring systems (with plastic membranes) for use in storage, filling and handling facilities for substances hazardous to water (SFH facilities) usually consist of a multi-layer sealing

Plastic/sealing sheets and membranes for use in storage, filling and handling facilities for substances hazardous to water (SHF facilities) are manufactured to a specific thickness, laid loosely on th

Coating materials as well as coating and sealing systems are used for sealing collecting trays, collecting rooms and surfaces in storage, filling and handling facilities for substances hazardous to wa

Inner coatings (as partial or full surface coatings) are applied to the inner surfaces of stationary steel tanks for the storage of liquids hazardous to water to make them liquid-tight. Similarly, the

Fire-retardants serve to improve the reaction-to-fire performance of solid timber or wood-based materials treated with them. Through treatment with the fire-retardant, the solid timber or wood-based m

Fire-protective fabrics coated with an intumescent material are used to wrap electrical cables and services to improve their reaction-to-fire performance and/or to impede the breakout and spread of a

Fire-resistant glazing is a non-load-bearing building component, usually consisting of one or more translucent elements, a frame and fixings, seals and fasteners which meet specific fire-resistance re

Sanitary appliances refer to those parts of a sanitary installation through which accumulating rainwater, foul or waste water is fed into the property drainage system (e.g. WCs, urinals, showers, bath

Resistance to fire of building components

Non-glued timber products and construction techniques and solid wood products include timber products and construction techniques that are mechanically jointed, e.g. timber framing. This work area als

In timber construction, a large variety of glued timber and wood-based products are used for a wide range of uses. These include: glued laminated timber, glued solid timber, plywood, laminated veneer

Wood preservatives for preventive treatment are used to prevent infestation of wood and wood-based materials by insects, fungi and other wood-destroying organisms. Wood preservatives for curative trea

Wood-concrete composite systems consist of a timber element and a concrete slab that are joined together in a shear-resistant manner. The shear-resistant bond can be achieved, for example, using screw