Liquid polymers are used for waterproofing of buildings. The waterproofing system can feature other components (e.g. reinforcing inserts, sealing tapes and collars) in addition to the liquid polymer.

Pipes for the conveyance of liquids hazardous to water are executed with special inner coatings or linings to make them liquid-tight. Inner coatings and linings for pipes and tanks for liquids hazardo

Supply ventilation units serve to supply indoor spaces with filtered and possibly preheated outside air. Exhaust ventilation units serve to remove exhaust air from indoor spaces. Ventilation

Construction products and construction techniques for airborne sound insulation ensure that airborne sound insulation requirements in buildings can be met. Thermal and sound insulation products

Membranes for use as roof or wall underlay are installed underneath the roofing of pitched roofs or underneath the external wall cladding. They serve as an additional rainproofing measure to prevent t

Joint sealing tape is used to seal joints between windows and facades or facade joints for protection against wind and driving rain. It is usually compressible to compensate for temperature-induced fa

Expansion joints for road bridges are designed to accommodate movements between the bridge segment and bridge abutments. The dimensioning of the joints is derived from the required movement capacity a

Structural bearings are components that allow for relative rotation of parts of structural works, transfer loads and permit or prevent displacements in one or more directions. The most common bearing

Auxiliary materials and accessories for external thermal insulation composite systems (ETICS) especially include adhesive foams for external thermal insulation made from cellular plastics, reinforcing

Fire-resistant enclosures for electric panels separate measuring devices and electric panels from required stairwells and spaces between required stairwells and exits or encase electric panels for saf

Smoke detection and triggering devices are used for controlling and triggering fire and smoke dampers in air ducts of HVAC systems. Following smoke detection and the corresponding signalling, the fire

Fire protection systems mainly consist of straight air duct sections, fittings, seals, connectors and fasteners, classified or unclassified wraps and shut-off devices for fire and smoke etc. They may

Fire dampers are installed in air ducts of ventilation systems in the area of fire-resistant separating elements to prevent the spread of fire and smoke along the ductwork to other fire compartments f

Gypsum plasterboards and gypsum fibre boards are used in timber construction as cladding for walls and floors. Roofs, walls, facades

Moisture-variable diffusion-inhibiting layers are films regulating moisture. They are used, for example, in flat-sloping or pitched, fully insulated, non-ventilated roof constructions with metal roofi

Ground anchors are prestressed anchor systems for transmitting tensile forces into the load-bearing ground, e.g. for anchoring shoring systems or slope stabilisation. Ground anchors consist of tendons

Facade systems with bonded facade cladding are ventilated external wall claddings where the cladding panels are bonded to the subframe profiles using an interference fit. The subframe is made of metal

Non-load-bearing internal partitions serve to divide rooms. They do not contribute to the stability or bracing of the building. However, there may be requirements with respect to sound insulation, the

Gabions are wire mesh boxes filled with graded aggregate. Individual gabions are assembled via stacking and connecting to form gabion assemblies. These assemblies serve, for example, to stabilise esca

With point supported glazing, the glass pane is mechanically fixed to the substructure either via point fasteners installed in drilled holes or via clamps (edge clamps). Point supported glazing is use

Non-glued timber products and construction techniques and solid wood products include timber products and construction techniques that are mechanically jointed, e.g. timber framing. This work area als

Surfaces for sports areas are single- or multi-layer floor systems with possible sport-relevant or protective features as well as other technical properties. Selection of the design, including the cov

Coatings for resilient floor coverings can consist of several layers and/or products and be one-, two- or multi-component systems. Polyacrylates, polyurethanes, epoxy and alkyd resins and others are u

Floor coatings are applied to load-bearing substrates. Such coatings – for example, based on synthetic resin – can be used immediately after curing. They can be made up of multiple layers and differen

Scaffold couplers in accordance with EN 74-1 or EN 74-2 are the most common form of detachable connectors in scaffolding. They usually provide an interference fit between scaffold tubes. Couplers are