for substances hazardous to water (SFH facilities) usually consist of a multi-layer sealing membrane with a leak detection device and a load-distributing and load-transferring superstructure. The sealing

substances hazardous to water (SHF facilities) are manufactured to a specific thickness, laid loosely on the prepared substrate and welded to form a walk-on collecting room seal. The sealing ensures that no substances

Sanitary appliances refer to those parts of a sanitary installation through which accumulating rainwater, foul or waste water is fed into the property drainage system (e.g. WCs, urinals, showers, baths

work done by CEN in a timely manner. In this respect, you could even consider it as a good sign that the ETA is currently not discussed much. Indeed, the explanation offered for this in a recent Member State [...] While both sides do their best to ensure a smooth cooperation and a timely citation of the EADs, I think it would be helpful for all stakeholders to define a reliable procedure and timeline in the future [...] the ETA route to CE marking. For those who are less acquainted with EOTA’s internal workings, what are the main functions of EOTA’s Technical Board? The Technical Board discusses issues related to assessment

Concrete constituents

independent assessment of highest international standing and as a frequently used basis for the CE marking of construction products not covered by a harmonised European standard. As Paul Caluwaerts, EOTA Secretary [...] effort. And it still is, says current EOTA president Karsten Kathage (DIBt). “The ETA is a key instrument also in today’s environment, allowing the market to respond quickly to changing customer needs and new [...] harmonised across Europe. The ETA thus ensures a high level of construction safety and fair competition.” Paul Caluwaerts ... Already 30 years of EOTA This is surely a moment to look back on the challenges overcome

Timber concrete composite systems consist of a timber element and a concrete slab that are joined together in a shear-resistant manner. The shear-resistant bond can be achieved, for example, using screws

Membranes for use as roof or wall underlay are installed underneath the roofing of pitched roofs or underneath the external wall cladding. They serve as an additional rainproofing measure to prevent t

the meaning of Section 2 of the Model Building Code ( Musterbauordnung ) and are hence relevant from a regulatory point of view. Temporary structures

case of fire, start reacting creating a thermally insulating effect which increases the resistance-to-fire of the coated steel element. The coating usually consists of a primer for corrosion protection or [...] or bonding agent (e.g. for galvanised steel), the reactive component and, where necessary, a top coat. Intumescent materials and fire protective coatings

the glass panes are continuously fixed via a linear mechanical glass support (e.g. profile) with a glass insertion depth. The glazing system is installed in such a manner that no constraint arises taking [...] special glass products such as: Curved glass : Curved glass is curved (deformed) in a hot bending process. The simplest form is a cylinder. Spherically curved constructions are very rare and are not yet covered

rendering system comprised of a reinforced base coat and a decorative finishing coat. Ceramic hard coverings may also be used as an alternative to a finishing coat. External thermal insulation composite systems [...] wall of a building. ETICS generally consist of insulation boards bonded to the substrate using adhesive mortar and, if required, additionally mechanically fixed (using anchors, profiles etc.) and a rendering

Insulation products under load-bearing elements (outside the waterproofing) must not only have special thermal insulation properties, but also meet structural requirements. Frequently used products in

Gabions are wire mesh boxes filled with graded aggregate. Individual gabions are assembled via stacking and connecting to form gabion assemblies. These assemblies serve, for example, to stabilise esca

Concrete constituents

Smooth and profiled metal components are frequently used to execute roof or wall claddings. Alongside the classic trapezoidal sheet, individual solutions are also frequent. Metal products and construc

ng slurries, other components (e.g. reinforcing inserts, sealing tapes and collars) can be used in a waterproofing system. Different waterproofing slurries differ significantly in terms of their crack-bridging

For external post-tensioning, the tendons lie outside the cross-section of the concrete member, but inside the envelope of the structure. These post-tensioning systems are used for prestressing concre

For internal unbonded post-tensioning, the prestressing tendons are arranged in a duct filled with a special corrosion protection system. These post-tensioning systems are used for prestressing concrete

For internal bonded post-tensioning, the tendons are arranged in a sheath (tendon duct) which is grouted after the prestressing force has been applied. These post-tensioning systems are used for prestressing

Overfill prevention devices are safety devices within the meaning of water legislation that interrupt the filling operation or trigger an audible/visual alarm before the maximum permitted filling leve

Timber fasteners and connectors are used to permanently connect timber elements to other elements. Mechanical fasteners in timber construction

collars for flashings and counter-flashings). One of the waterproofing components is a liquid applied waterproofing product or a waterproofing membrane, sheet or plate. The waterproofing is created in combination

version makes the report accessible to an even broader, international audience. This underscores DIBt’s ongoing commitment to international dialogue and transparent information on building regulation. In [...] the completion of the second generation of Eurocodes – as well as the widely debated question of what a reasonable cost for future-oriented and safe construction is. The DIBt Annual Report 2023/2024 is available

Non-glued timber products and construction techniques and solid wood products include timber products and construction techniques that are mechanically jointed, e.g. timber framing. This work area als